|
Hirpa
Lemu, PhD Professor of Mechanical Design Engineering, UiS, Norway PhD /Dr.Ing. (2002), Computational Intelligence in Integrated CAD/CAM, NTNU, Norway MSc /Siv.Ing (1996), Manufacturing Engineering, NTNU, Norway BSc (1989), Mechanical Engineering, AAU, Ethiopia |
|
[Home] [Teaching] [BSc Projects] [MSc Theses] [PhD & Research Alumni] [Publications] [Research Areas] [Int. Collaborations] [Review & Editorial] [Knowledge dbase] |
||
|
International Academic Collaborative Projects and academic mobilities
Jimma
University and Wallaga University (2021 - 2026): NORHED II Grant, Size
19.15 million NOK
Topic: INDMET - Institutional Network
for Design and Manufacturing Education and Training
P.
Tuma, M. Petru, et al. (2014 - 2016), Technical University of Liberec, Czech
Republic (EEA Norwegian Grants, Size 400 000 NOK).
Topic:
Academic collaboration within Mechanical Eng., Materials and
Mechatronics research
I.
D. Nikolova (spring 2015),
Technical
University of Sofia
at Sliven (ERASMUS PhD mobility)
Topic:
Design
and optimisation of electro-mechanical module for drivers of
reconfigurable and mechatronic systems
G.
Wang et al.
(2013 - 2017), Simon Fraser University, Canada and Alaska Univ. of
Anchorage, USA (SIU funded, Size 300 000 NOK)
Research
topic: CoSD-HN:
Collaboration
on
Simulation-based Design for High North
R.
Petrova
(Fall 2014),
Technical
University of Sofia
at Sliven (EEA funded)
Research
topic: Multi-criteria
Optimization of the Clamp Motion of a Surgical Robot with Parallel
Structure
Stephan Kalchev
(Spring
2014),
Technical
University of Sofia
at Sliven (ERASMUS)
Research
topic:
Study
of existing methodologies for calculation and modelling of loses along
powerpipes.
P.
Akangah
(2013 - 2015), North Carolina State University of Agriculture and
Technology (SIU funded, Size 150 000 NOK)
Topic:
Academic Exchange collaboration in Mechanical Engineering
R.
Petrova
(Spring 2012),
Technical
University of Sofia
at Sliven (EEA funded)
Research topic:
Investigation
on the Design of HAW blade Using CAE Simulation Approach
A.
Beyene (2009
- 2010), San Diego State University, CA, USA (SIU funded, Size 100 000
NOK)
Research
topic: Research and academic collaboration on morphing blade
technology
W.
Lisowski et al.
(2009 - 2011), AGH University of Science and Technology, Poland (EEA,
EU funded, Size 1,85 M NOK)
Research
topic:
Study
of
mechatronic international curriculum in Norway and Poland
T.
Trzepiencinski
(2009
- 2011),
Rzeszow
University of Technology,
Poland
(EEA
funded)
Research
topic: Numerical
Study of Sheet Drawing Process Taking into Consideration Anisotropy of
Friction and Mechanical Property of the Sheet
International Academic collaborations
Africa
Addis Ababa University, Dept. of Mechanical Engineering
Wollega University, Ethiopia
Jimma University, Institute of Technology, Ethiopia
Assiut University, Egypt
Moi University, Kenya
Europe
Norwegian University of Science and Technology, NTNU
University of Agder
University College of Narvik
University of Vigo, Spain
Huelva polytechnique Institute, Spain
Rzeszow
University of Technology,
Dept. of Materials Forming and Processing, Poland
AGH University of Science and Technology, Poland
Technical University of Sofia, Bulgaria
North America
San Diego State University (SDSU)
North Carolina State University (NCA&T)
University of Alaska, Anchorage (UAA)
University of Alberta (UA), Ca.
Simon Fraser University (SFU), Ca.
(.....)